Why do we choose straw pellet plant?

Corn straw has a wide range of agricultural, livestock and industrial uses. The processing machinery of straw pellet plant for corn stalks, barley straw, sorghum straw and other crop straw are developing faster. Therefore, it is believed that as long as the market is recognized, the investment potential of straw pellet plant can be good.

At present, corn straw is mainly used in the market for straw mixed feed and biomass fuel as the main processing projects. Its market potential is mainly stimulated by low-cost and waste straw recycling policies and financial subsidies. It plays an important role in the energy market and feed market.

straw pellet plant

The corn stalks is pressed into pellets used as the raw materials of the biomass electric generation. Every 10,000 tons of corn straw can produce 7 million degrees of electricity. The electric generation plant has emerged based on the corn stalk as raw materials. Corn straw can also be fermented by biogas to generate heat energy, replace coal and electricity, and provide energy for rural cooking and heating.

Speaking of straw, the first treatment method we think of is combustion treatment. Although this method is direct, it is easy to cause a lot of impact on the environment. With the development of society and the promotion of the country, this method is also less and less, but straw has not been effectively developed and utilized. Don’t burn straw. Straw biomass pellet plant turns it into biomass pellet fuel permitted by the state.

Straw pellet plant effectively solves this embarrassing problem. The straw pellet plant takes the traditional straw as the raw material and processes the straw mechanically, so that the straw becomes a granular object. After becoming a granular object, it is not only more convenient for transportation, but also improves the combustion performance, making the straw from waste into a biofuel that major manufacturers compete to choose.

In addition, sawdust and some daily wood leftovers can be used as raw materials for production. It is convenient to obtain materials and widely used. It is a sharp tool to turn waste into treasure. If there are abundant straw resources near you, you might as well choose one of our straw pellet plant. I believe you will have a good harvest.

Corn straw pellet plant mainly includes mechanical configurations such as hammer mill, drum drying machine, mixer, straw pellet machine, cooler and packing system, while corn straw pellet production line mainly includes configurations such as straw hammer mill, dryer, straw pellet mill, cooling machine and packing system.

After the straw is processed by the straw pellet machine, it will become straw fuel pellets. We all know that straw accounts for a very large proportion in some agricultural power countries, and we usually burn or throw away straw because straw is really useless.

So why buy a straw pellet machine to process straw into fuel pellets? The price of straw pellet machine is not a bit of cash. Is it cost-effective to process almost worthless straw?

The answer is yes. Why is that? Coal is the fuel we before usually used. We are all familiar with coal. Coal is the main fuel we use. However, the formation time of coal is too long, which means that if we don’t find a way, the coal resources will be exhausted. The combustion of coal will release harmful air pollutants, which also means that if we want to have a good living environment, we must find a resource that can replace coal.

With the continuous development trend of social development, the demand for straw pellet machine is increasing, and the well-known brands of pellet machine are also slowly increasing. Many customers who do not want to go out to work are considering that they are doing business or working again. Some farmers are interested in the breeding industry. Recently, they want to know about the relevant machinery and equipment, but they do not know how to choose this kind of machinery and equipment, let alone which one is good. This doubt is also the doubt of many customers. Next, I will share with many customers how to choose a suitable straw pellet machine.

First, whether it is the manufacturer. Because there are many manufacturers in the market, large and small. Whether it is a small car room or a powerful manufacturer, it is recommended that users conduct field investigation when necessary. Look at the size of the manufacturer’s factory and whether there are technicians and after-sales teams.

Secondly, check the accessories of the straw pellet machine. Each equipment is inseparable from straw pellet mill accessories. Poor material selection of straw pellet machine accessories will affect the working effect and service life of the straw pellet machine.

Thirdly, check whether there are successful cases. If the straw pellet machine manufacturer has strong strength, there will be customer cases all over the world, which can usually be seen on the enterprise website.

Finally, after-sales service. Perfect after-sales service is a necessary service for regular manufacturers. Many small brands do not have such services. The more detailed the service, the stronger the strength of the manufacturer and the quality of the equipment will be guaranteed.

RICHI Machinery can not only provide straw pellet machine alone, but also can design complete straw pellet production line for you. This can all be specially customized for you. If you want to learn about this, just send inquiry to us.

traw

Hot sale organic fertilizer pellet making machine

Extrusion organic fertilizer pellet making machine is one of the main (biological) organic fertilizer production equipment currently produced by our company. The organic fertilizer pellet making machine has excellent technology, simple operation, and various models of different models are designed. It is an ideal processing machine for fertilizer processing units.

This organic fertilizer pellet making machine can not only granulate a variety of organic substances, but especially the crude fiber materials that are difficult to be granulated by conventional equipment, such as: crop straw, wine dregs, fungus dregs, medicinal dregs, animal dung, etc. The granulation effect of raw materials such as humic acid and municipal sludge has also achieved good results.

  • This series of organic fertilizer production machine is a new type of inclined disc granulation equipment: the granulation rate can reach more than 90%.
  • The reducer and the motor are driven by flexible belts, which can start smoothly, reduce the impact force and improve the service life of the equipment.
  • The bottom of the granulating plate is reinforced by a number of radiating steel plates, which is sturdy and durable, not deformed, thickened, heavier, and has a solid base design.
  • It does not need anchor bolts to fix it, and the operation is stable. The main gear of the organic fertilizer pellet making machine adopts high-frequency quenching.
  • The service life is doubled. After the anti-corrosion treatment in the granulation pan, it is durable. The machine has the advantages of uniform granulation, high ball formation rate, stable operation, durable organic fertilizer pellet making machine and long service life.
  • It is well received by users and is the choice of the majority of users. It is an ideal product for my country’s environmental protection applicable technology promotion project.
organic fertilizer pellet making machine

1. Structural characteristics of organic fertilizer granulator

The organic fertilizer pellet making machine consists of a body part, a granulating rotor part and a transmission part.

The working principle of the organic fertilizer pellet machine is that the material enters the machine from the feeding port at one end of the body, and is continuously pushed by the granulating rotor and mechanically moves with the casing to achieve the purpose of granulation, and the finished granules are pushed out of the machine at the other end of the body.

  • The rotor of organic fertilizer pellet making machine is driven by the motor and reducer of the transmission part, and most of the transmission part and the body part are fixed on the same frame, so that not only the structure is firm, the operation is stable, but also the installation is very convenient.
  • It is a new era of environmentally friendly organic fertilizer pellet making machine. The working principle of this series of fertilizer pelletizer: the pulley and belt are driven by the main motor, and the pinion gear is driven by the reducer.
  • On the main shaft fixed on the adjustment plate of the frame to support the work of the entire granulation plate (this organic fertilizer pellet machine is used in conjunction with the sprayer) after the material enters the granulation plate, the continuous rotation of the granulation plate and the spray device make the material uniform the sticking together will form spherical particles.
  • An automatic cleaning device is designed in the upper part of the granulating disc of the organic fertilizer pellet making machine to prevent the material from sticking to the wall, thereby greatly improving the service life of thefertilizer pelletizer.
  • With the continuous rotation of the motor, the continuous flow of the material Only after entering, can mass production be realized, which has reached the need of continuous work.

2. Structural features of organic fertilizer pellet making machine

  • The bottom of the ball-forming disc is reinforced with multiple radiating steel plates, which have high strength and rigidity.
  • The transmission gear adopts high-frequency quenching treatment, which has a long service life.
  • Using a unique non-power combined scraper device to reduce auxiliary power consumption.
  • The reducer and the motor are driven by flexible belts, with smooth start and low impact force.
  • The transmission system of the organic fertilizer pellet making machine is equipped with a bridge device, which reduces the direct impact of the gear and the reducer, improves the operation stability of the equipment, and increases the service life of the main components.
  • The ball forming disc is composed of a disc body and a disc segment. The disc segment can be adjusted up and down along the disc body, and the end of the disc segment is an edge flange to ensure that the material ball will not be pulled or torn when it is discharged from the organic fertilizer making machine disc;
  • After the frame is welded and the stress is relieved, its mating surface is processed and formed on the boring and milling machine at one time to ensure higher assembly accuracy and smoother operation of the whole machine;
  • The scraper device of organic fertilizer pellet making machine consisting of a combination scraper without power and a scraper for cleaning corners can make the balling effect better when used together with the optimized ball-forming disc while cleaning the bottom and edges.

3. Which raw materials are suitable?

  • Bio-organic fertilizer pellet making machine using peat, lignite, organic fertilizer sludge and straw as raw materials;
  • Granulate organic compound fertilizer with organic fertilizer such as chicken manure as the main raw material;
  • The cake fertilizer system with bean cake as the main raw material;
  • Pelleting full-price feed and mixed feed with corn, beans, grass meal, etc. as raw materials;
  • Bio-feed straw pellets are granulated with crop straw as raw material.

The “Organic Fertilizer Spherical Granulator” developed by the company, on the basis of absorbing, digesting and drawing lessons from the principles of advanced organic fertilizer pellet making machine at home and abroad, has finally overcome the high temperature sterilization of biological fertilizers produced by existing organic fertilizer pellet making machine after repeated experiments and development.

In order to solve the problems of poor granulation and difficult drying, a new “bio-organic fertilizer granulator” with reasonable design, simple structure, normal temperature preservation and smooth granules was developed, which ended the difficulty of granulating organic fertilizers easily due to the body, and it was even more difficult to reverse the ball.

 The granules produced by organic fertilizer pellet making machine have low moisture content and are easy to dry. At the same time, it can also produce feed pellets and fill the domestic gap of multi-purpose machine in the field of pelletizing machinery.

What is the output of floating fish feed making machine?

What is the output of the floating fish feed making machine? Is it expensive? For small farmers and individual family farmers, a new floating fish feed extruder machine can be put into production, because many farmers cannot use commercial electricity at home, and most of them generally use household lighting electricity.

When selecting floating fish feed making machine, you need to consider the voltage issue. Some users will ask if there is a single-phase electric floating fish feed pellet machine.

 According to the experience of the sales staff, single-phase electricity and two-phase electricity are the same thing, both of which are 220 volts for household lighting. So what is the output of the new two-phase electric floating fish feed making machine?

The floating fish feed making machine can produce 60-100 kg of feed per hour, the power is 220V, the overall body is small, the floor space is very small, the power consumption is small, the pelleting rate is high, and 1-2 people can operate the production, saving labor and time.

 The pressed pellets are uniform in size, and the raw materials such as rural crop grains such as soybean meal, wheat bran, hay, grass, alfalfa grass, corn meal and so on can be processed and suitable for various raw materials.

The floating fish feed making machine can suppress various animal feeds, such as cattle, sheep, pigs, rabbits, chickens, ducks, geese, birds, pigeons, and aquatic fish feeds. This equipment belongs to a multi-purpose floating feed machine.

1. The scope of application of floating fish feed making machine

This equipment is suitable for farmers in small and medium-sized farms, and its output is about 60-100 kg when its operation is relatively simple. The output is relatively small, but it is very suitable for family workshops.

So is a new two-phase electric floating fish feed making machine expensive? How much is it on the market right now? It is understood that the prices of pellet machines currently on the market vary, some are sold for several thousand yuan, and some are sold for tens of thousands of dollars.

Through the description of the above, most users must have learned that the classification of floating fish feed making machine includes: Large, medium and small, the output is also large and small, the machine models are different, and there are two-phase motor machines and three-phase motor pellet machines.

So the natural price of the floating fish feed making machine will be different, RICHI recommends that users can consult the sales consultant of regular pellet machine manufacturers, then you will choose a suitable floating fish feed making machine for you according to your actual situation.

floating fish feed making machine

2. Which brand of floating fish feed making machine is easy to use?

Because of its high efficiency and multiple functions, the floating fish feed making machine is favored by users at home and abroad. Every farmer wants to choose a pellet machine with advanced technology and high quality. How to choose a floating fish feed making machine?

The following RICHI gives some suggestions for reference when choosing a floating pellet machine for the majority of friends!

  • Try to choose a floating fish feed making machine manufacturer with a certain scale and strength. Usually, a manufacturer with a strong scale and strength must have its own R&D team in order to produce a pellet machine with leading technology and high quality. In addition, it can provide perfect future services.
  • Choose the right pellet machine model. The floating fish feed making machine mainly includes small, medium and large, with output ranging from 60 kilograms per hour to one ton per hour. There are electric, diesel, tractor, gasoline, and mold types. Disc apertures range from 2.5-12mm.
  • When choosing floating fish feed making machine, if farmers have time, it is recommended to bring their own raw materials and visit them in person. Users can directly understand the scale and strength of the pellet machine manufacturer by personally inspecting the pellet machine production workshop. In addition to these, they also depend on the technical ability and service level.
  • At the same time, they can see the quality of the pellet machine equipment with their own eyes. More importantly, they can use their own Requires good face-to-face communication with the production plant.

If you can do the above points, you can choose a more reliable floating fish feed making machine manufacturer.

3. Is it easy to use floating fish feed making machine?

Is it easy to mold the pellet feed made by the dry-in-dry-out floating fish feed making machine?

Moisture content in pellet feed is an important quality inspection index, which directly affects the quality of pellets and the economic benefits of users. If the moisture content exceeds a reasonable standard, the feed will be prone to mildew and deterioration.

As long as the moisture of the feed is well controlled, such as controlling 13% of the feed moisture, the moisture of the produced feed is between 8-10%, and the moisture after cooling is generally about 8%, which is similar to the space humidity, so it will not mold.

The variety of raw materials used by farmers leads to the variability of water content of pellet feed. The moisture content of semi-finished powder after mixing should be controlled at 9%-14%. Before conditioning, the moisture content of powder should be controlled at 12.5%. It should not exceed 13%, otherwise the pellets are prone to mildew and deterioration.

After conditioning by floating fish feed making machine, the moisture content of the powder into the mold should be controlled at 15%-16%, so that the quality of the pelleted feed produced is better, the finish is uniform, the pulverization rate is low, and the moisture content of the finished material can also meet the standard requirements.

4. Benefits of using a floating fish feed making machine?

  • Clean and hygienic, the feed can be stored for about half a year to ensure balanced animal nutrition
  • The palatability is obviously improved, and the appetite of fish is increased.
  • Improve fish immunity, simple operation and low cost
  • Reduce the cost of breeding and improve the income of breeding.
  • The floating fish feed making machine can be used for multiple purposes, suitable for small farms, individual household farmers, feed processing plants, etc.
  • The floating fish feed making machine can be used to process feed pellets for cattle, sheep, pigs, rabbits, chickens, ducks, goose and fish.
biomass pellet press

How biomass pellet press runs smoothly?

The biomass pellet press is pressed evenly and runs smoothly. Richi Machinery is a manufacturer specializing in the production of biomass pellet press machines. There are various models and specifications. Customers send raw materials, and we can also customize biomass pellet machines for customers. Your various production needs.

1. Features of biomass pellet press:

(1) The two ends of the pressure roller of the biomass pellet press type are in the same line speed as the inner and outer rings of the grinding plate, and there is no dislocation friction between the wheel and the mold, which reduces the resistance, reduces the kinetic energy loss, and prolongs the service life of the mold.

(2) The pressing rollers of the biomass pellet press are evenly set, and the operation is stable.

(3) The biofuel pellet machine adopts a central pressure regulating structure to adapt to different materials and ensure the pressing effect. Compression molding of wood chips, corn stalks, etc. requires a lot of pressure. In the same kind of biomass pelletizing equipment, the roller part is the central part of the whole equipment, and the use of high-quality steel improves the service life of the roller.

(4) The template of this structure is stationary, and the main shaft drives the pressing wheel to press the material, which is suitable for pressing straw pellets.

(5) The mold of biomass pellet making machine is vertical, feeding vertically, no arch, easy to dissipate heat.

(6) The mold of the biomass pellet press is static, the pressure wheel rotates, the material is centrifuged, and the surrounding area is evenly distributed.

(7) The biomass pellet press has two layers of mold, which can be used for both purposes, with high output and energy saving.

(8) The biomass pellet pressing machine has independent lubrication, high pressure filtration, clean and smooth.

(8) The independent frequency conversion device of the biomass pellet press ensures the molding rate of pellets.

2. Market prospect:

biomass pellet press

Major agricultural residues and most forestry residues can be used as good raw materials for biomass briquette fuel, and have great potential for energy utilization; the biomass briquette fuel market in central China, east China, south China, north China and northeast China is well developed.

Develop and improve biomass fuel pellet machine technology and briquette fuel combustion technology, provide more incentives and support policies for briquette fuel, establish more biomass pellet press demonstration bases, raise public awareness of environmental protection and limit the unreasonable use of coal, etc. Conducive to the development of biomass fuel in China, biomass pellet press has great market prospects.

3. Application of biomass pellet fuel

The 2020 Youth Olympic Games will be held in Lausanne. The Lausanne Youth Olympic Games Organizing Committee recently announced that the main Olympic torch built on June 17, 2019 used biomass pellet fuel as the fuel to ignite the torch for the first time. Applied at international events.

The only fuel used in the Youth Olympic torch will be biomass pellet fuel, which is the first time in the history of the Olympic Games. It reflects the concept of sustainable development, and it is also a recognition of biomass wood pellet fuel.

The global promotion of this sustainable fuel has a guiding role and significance. Biomass pellet fuel will ignite the main torch of the Youth Olympic Games. Do we have any reason to reject biomass pellet fuel?

Biomass pellet fuel is a kind of biomass energy, which has inexhaustible characteristics. Using biomass pellet fuel instead of traditional fossil energy (coal, oil, natural gas) can reduce the emission of greenhouse gas carbon dioxide and reduce the greenhouse effect. It has the function of protecting our living environment.

At the same time, it plays an important role in the construction of energy security that relies heavily on imported natural gas energy, and is also in line with the development concept of comprehensive reuse of agricultural and forestry resources.

Biomass pellet fuel is the use of perennial raw materials in rural areas: such as wood, branches, peanut shells, wheat straw, corn stalks, rice husks, sawdust, shavings, etc. The relevant process is processed into 6-10mm solid granular fuel.

The granular fuel has the characteristics of high calorific value, low ash content, low moisture, high density, resistance to combustion, and no black smoke. It is a typical environmentally friendly boiler fuel.

Environmental benefits can also generate economic benefits, and the reuse of waste is beneficial to the country and the people, and meets the requirements of environmental protection development.

The professional mechanical equipment for making biomass pellets is called biomass pellet press machine, which can process all kinds of combustible biomass raw materials without adding any additives through biomass pellet press equipment to produce biomass pellet fuel.

Biomass pellet fuel is the use of perennial raw materials in rural areas: such as wood, branches, peanut shells, wheat straw, corn stalks, rice husks, sawdust, shavings, etc. The relevant process is processed into 6-10mm solid granular fuel.

The granular fuel has the characteristics of high calorific value, low ash content, low moisture, high density, resistance to combustion, and no black smoke. It is a typical environmentally friendly boiler fuel.

Environmental benefits can also generate economic benefits, and the reuse of waste is beneficial to the country and the people, and meets the requirements of environmental protection development.

4.Questions about biomass pellet press

The propeller of the biomass granulator uses a live head and a live rod to reduce the repair cost and make the production more convenient. In terms of equipment maintenance, the oil-coated lubrication is changed to oil-immersed lubrication, which prolongs the service life of the biomass pellet press equipment.

Many users are often troubled by the poor molding effect or the unachievable output when using the biomass pellet press machine. Now the pellet machine manufacturer introduces some knowledge on this issue:

The main factors that determine the shape of the biomass pellet press are the size and moisture of the wood chips. These two points are crucial. Generally, we require that the size of wood chips should not be larger than two-thirds of the diameter of the pellets processed by the biomass pellet machine, which is about 5-6mm.

Energy saving, environmental protection, and green life are the fashionable themes of today’s society, and the biomass pellet press is a device that responds to this concept. It uses rural corn stalks, corn cob, leaves and other crops to create a new type of non-polluting fuel, which is a secondary use of it.

If the size is too large, the time of the raw material in the granulating chamber will be prolonged, which directly affects the output, and if the raw material is too large, it needs to be crushed in the granulating chamber before entering the hole of the abrasive tool, so that the mold is pressed. Increased wheel wear.

The biomass pellet press requires that the moisture content of wood chips is generally between 10% and 15%. If the water is too large, the surface of the processed pellets is not smooth and has cracks. No matter how much water is present, it will not be formed directly. If the moisture is too small, the powder output rate of the biomass pellet machine is high or the pellets are not directly produced.

Founded in 1995, Richi Machinery has been developing steadily and steadily in the field of pellet processing and biomass pellet mill for sale. It is mainly engaged in the R&D and manufacturing of equipment required for industry projects such as feed, biomass energy, and organic fertilizer. It has gradually formed a complete R&D, production, sales and service system, provide technical solutions and supporting products.

How to improve efficiency of wood pellet mill for sale?

When it comes to wood pellet mill for sale, I believe that many customers know about it. The wood pellet mill machine can make wood pellets into biomass fuel pellets, which not only realizes the reuse of resources, saves resources, but also protects the environment and realizes green and sustainable development. Sawdust has been widely used in our life and production, so how to improve the production efficiency of the manufacturer’s wood pellet mill for sale?

1. How to improve efficiency of wood pellet mill for sale?

How to improve the working efficiency of wood pellet mill for sale? After purchasing our wood pellet mill equipment, customers naturally want high-yield production efficiency, but if the choice is not good or the operation is improper, it will affect the production efficiency of our wood pellet machine equipment.

How to do it? The following small series of Richi Machinery will introduce to you, so that you can better understand our How to improve the working efficiency of wood pellet mill for sale.

(1) Choose the wood pellet mill for sale suitable for your production capacity. For example, the actual output of the factory is 2 tons. If you choose a wood pelletizer machine with an output of 3 tons per hour, it will be overkill and waste.

(2) The feeding of the wood pellet mill should be uniform during the production process, so as to ensure the smooth operation of the machine, no material blockage, and more uniform pellets.

(3) Control the gap between the die of the wood pellet mill for sale and the pressing wheel. After the material is cured at high temperature, it will be pressed and formed by the pressing wheel, so that the resulting pellets have good compactness and are strong and beautiful.

(4) According to your actual needs, choose the appropriate diameter of the die of the wood pellet mill for sale. If the hole diameter is too small or too large, it will cause the phenomenon of low output and no material, and will also seriously affect the production efficiency of the wood pellet machine.

(5) Lubricate and clean regularly of the wood pellet mill for sale. Long-term friction between the mold and the pressure roller will damage the mold. Regular oil injection and cleaning can not only ensure the cleanliness of the mold, but also reduce the friction between the two, reduce costs, and improve production efficiency.

2. How to reduce the frequency of failure of biomass wood pellet mill for sale?

wood pellet mill for sale
cof

The emergence of biomass energy fuels not only improves global environmental governance, but also drives the development of energy-saving and environmental protection equipment in China. Richi Wood Pellet Machinery Co., Ltd. has advanced technical experience in the field of biomass wood pellet mill machine manufacturing.

The quality of the equipment produced is guaranteed. At the same time, the pellet fuel products produced by the equipment also meet the standards. Now it has become a hot wood pellet mill manufacturer at home and abroad.

However, although the wood pellet mill for sale produced by our factory has a high quality advantage, it cannot guarantee the damage caused to the machine by some users due to carelessness during use. Today, the editor will introduce to you how to reduce the failure of the wood pellet machine caused by improper use.

(1) Power supply

When using the biomass wood pellet mill for sale, it is necessary to check whether the power supply is in good contact. This is not only to maintain the biomass pellet machine itself, but also to ensure the safety of the operator.

Once there is a problem with the power supply of the wood pellet mill for sale, it is very likely that the host and adapter of the biomass pellet machine will be burned. This problem has occurred many times, but many people still do not pay attention to it.

(2) Equipment

During the operation of the wood pellet mill for sale, do not shake the machine. Because the machine is running, the screen clamps are evenly selected. If the machine is shaken, the screen will also shake. In this way, the screen cannot play the role of screening, and the biomass pellets produced by the biomass wood pellet machine will fail.

The pellet machines produced by our factory will be equipped with anti-shake devices, so that the produced products can be better maintained. However, when operating, it still needs the attention of our customers and friends.

(3) Maintenance

When using the biomass wood pellet press machine to process ingredients, due to the different proportions of ingredients and different screens, the load of the host is different. After using the biomass pellet machine for a period of time, the The main engine is maintained, which can also increase the service life of the wood pellet mill for sale.

Small Poultry Feed Making Machine

Pelletizing Rate of Small Poultry Feed Making Machine

When buying a mobile phone, ask about resolution, memory, operating memory, pixels, etc. Because people’s requirements for mobile phones are getting higher and higher. The same goes for pellet feeders. So how much pelletizing rate can a small poultry feed making machine supplier achieve?

Small poultry feed making machine is a product with higher consultation. There are many farmers raising poultry in China, and suppliers of small poultry feed making machine have attracted everyone’s attention.

Pelletizing rate is a relevant parameter of small poultry feed making machine. A poultry feed pellet making machine with a high granulation rate has a high granulation rate and can be formed at one time; a small poultry feed making machine with a low granulation rate may have more feed and the pellets are not formed, which requires reprocessing, which is time-consuming and labor-intensive and reduces production efficiency. So what is the pellet output rate of the pellet feeder?

Generally speaking, the pelletizing rate of high-quality small poultry feed making machine can reach more than 98%. In addition to machines, it is also related to the human factor. There are two main aspects.

(1) Moisture. The moisture content of poultry feed pellet mill should be 12%~18%. If the water is too large, it will not form, and if the water is too small, it is easy to produce powder.

(2) Raw materials. Generally, small poultry feed making machine manufacturers recommend using raw materials with a certain viscosity, such as corn, bran, etc. Raw materials with low viscosity are not easy to mold. If the viscosity of the raw material itself is small, it is best to mix it with other raw materials.

For more questions about the productivity of the complete set of poultry feed equipment, please contact Richi Machinery. Richi Machinery can send you free equipment information and provide design solutions.

Small Poultry Feed Making Machine

How to carry out post-maintenance of poultry feed machine?

The utilization rate of small poultry feed making machine is getting wider and wider, and now some small pellet machines have entered each of our families. Therefore, in order to make these home convenient, so we must learn how to maintain and maintain the feed pellet machine.

Be careful when choosing the right machine. Choose a suitable machine, check whether it is running without noise, whether the feed pellet machine is uniform when used, whether the size of the pellets is the same, etc.

These are basic things. After purchase, we have to maintain it ourselves. Although the small poultry feed making machine is small, the parts are the same as the large mechanical parts, so we should also maintain it like a large pellet machine when maintaining it.

Regular inspection of parts is checked once a month, including whether the moving parts such as Loran slide bar, screw, bearing are in normal operation, good flexibility, damaged, etc. Many people often ask why the pellet size of the pellet machine is not uniform, in fact, due to the screw and The problem with the slide bar, some pellets of uneven size slide out at the same time and do not pass through the main body part.

Therefore, we test these major components during maintenance. If we don’t use the machine for a long time, we must find a film to cover the machine, try to keep the dust out of the machine, and open it regularly, and draw lubricating oil to prevent some parts from rusting often. Also, don’t use it indoors with some high pH.

These machines are susceptible to acid and alkali corrosion. After construction, we should clean up the inside of the machine, clean up some residual feed, and clean up the poultry feed pellet making machine for the next use.

These jobs are often neglected by us in our life, there are many people who do not manage the feed pellet machine after use, so the machine is getting more and more difficult, so this also gives us a warning, we must take good care of the small poultry feed making machine, because his Long-term work will age, and failure to maintain them will shorten their lifespan. (Related post:cat litter making machine

What are the benefits of a poultry feed pellet machine?

The small poultry feed making machine naturally heats up to about 70 degrees when processing feed pellets, and various additives and drugs can be added, with minimal nutrient loss. The pellet surface is smooth, the hardness is moderate, and the internal curing degree is deep. It also kills disease-causing microorganisms and parasites and ensures feed quality. Can be used for rabbits, chickens, ducks, geese, fish, pigs, aquatic products, etc.

Our small poultry feed making machine uses a shaft drive to make pellets without the need for belts. Utilizing high technology, it is much more visible than the original belt drive. The feed pellet machine belongs to the kind of dry in and dry out. During the manufacturing process, we use these small families for breeding. At the same time, the pellets can be stored for a long time, and it is not a problem for more than half a year.

The pellets produced by the poultry feed pellet machine have high hardness, smooth surface and mature interior, which can be processed as breeding feed. The production of feed can improve the digestion and absorption of animal nutrition, reduce the adverse effects of digestion, and can kill pathogenic microorganisms such as various parasite eggs, enhancing the animal disease resistance, reducing various insect and digestive diseases. (Related post: cat litter production line)

It conforms to the characteristics of poultry, pigs, cattle and sheep meshing animals, improves the palatability of the feed, is convenient to eat, improves the nutrient absorption and conversion rate, is convenient for long-term storage and transportation, and has higher economic benefits than mixed powder feeds.

Nowadays, many small farms use other fine feed to crush straw, and use small poultry feed making machine to press into pellets, which become Chinese food for poultry, pigs, cattle and sheep.